DVO7
← Proteus/1|
OverviewHistorySchematicsPartsCap KitRepairMuseumDiscussions
← Repair Guides|Multi-Timbral Setup (Sequencer Mode)
Easy10 min

Multi-Timbral Setup (Sequencer Mode)

Symptoms this guide addresses

  • •Only one sound plays
  • •Need to layer sounds on different MIDI channels
  1. Press the Master button.
  2. Select 'Multi' mode in the MIDI MODE screen.
  3. Go to the MIDI ENABLE screen and turn ON the channels you wish to use.
  4. Press the Cursor button to return to the main screen.
  5. Move the cursor under the MIDI channel number to select and configure presets for each channel.

Source: Proteus/1 — proteusownersmanual (manual)

← All repair guidesParts index →