← Repair Guides|Scale and Frequency Calibration
Easy10 min

Scale and Frequency Calibration

  1. Depress one octave tab and A above middle G.
  2. Adjust R16 for approximately 440 Hz.
  3. Depress C above middle G and adjust fine tuning control to 500 Hz.
  4. Depress low C. Verify frequency is 125 Hz.
  5. Raise one octave tab and adjust R10 for precisely 250 Hz.
  6. Depress two octave tab. Play middle F. Flip two octave tab up and adjust R21 for precisely two octave frequency change.
  7. With all tabs up, depress highest C. Adjust fine tune for 2000 Hz.
  8. Play lowest C. Adjust R25 for 250 Hz.
  9. Repeat steps 6-9 until unit is in tune.

Source: Satellite — moog-satellite-service-manual (manual)